Easy Up & Down After the initial installation one person can take this frame down or put it up in less than 30 minutes. All hardware to hang your net is included. All of our frame kits, the net hangs inside of the frame.
Because you don't want the ball bouncing off the frame & coming back and hitting you in the head. Our 40' x 12' x 10' - 1 3/8 frame EZ UP & DOWN Batting Cage Frame Kit was designed by us here at Jones-Sports.
It is an excellent well thought out design. I think you will like it as much as we do. Kit comes with everything you need to assemble except the poles. 10' 6 poles from Menards, Lowe's, or Home Depot. Net Construction: #42 Twine Size HDPE (60PLY) hung on a square.
Perimeter Ropes: HD 3/8 Polyethylene Woven and Sewn (Top, Center, and all 4 Corners). Extended Ropes: HD 3/8 Polyethylene Woven and Sewn extend 4 to 6 ft. (top center & all 4 corners). Recommended Use: Youth Through Commercial. Seam Construction: 3-Piece Others typically have 5!
Weather Protection: Weather and UV Protection (Embedded During Extrusion). We are a family business started by my grandfather over 50 years ago. We intend on being in business for another 50 years. We only sell quality, well made products. The frame for your netting is 1 foot longer, 1 foot wider and 6 inches shorter than your net size.
For this 12' wide x 40' long net your corner ground inserts center to center will be 13' x 41'. Along the 41' side you will have ground inserts at.
0', 10' 3", 20' 6", 30'9 & 41'. Use a string for alignment, and a tape measure to make sure that you get all of the Ground Sockets installed in the proper location.Also measure across the diagonals to make sure the frame is square. Kit Includes the Following Parts. (A) 3-Way Corners 4 pcs.
(B) 4-Way Corners 6 pcs. (C) Pipe Extensions 5 pcs. (E) Self Drilling Screws 5 pcs.(F) Net Hangers 19 pcs. (G) Ground Sockets 10 pcs. (I) Ground Socket Installation Tool. (J) Yellow Socket Plugs 10 pcs. Kit Does NOT Include the Following Parts.
(CL) 10' 6 Length Top Rail Pipe 23 pcs NOT INCLUDED. You will need an area about 41' Long & 13' Wide.
That you mark off this area before starting. Your 4 corner ground sockets center to center will be 41' x 13' Lay this out with stakes, string, and a tape measure. Measure across both diagonals to make sure they measure the same so that everything is square.
Use the Auger bit to drill the 4 corner holes. Don't crowd the bit or it will screw into the ground. You will have a 12 deep hole in a minute or two. If you run into rocks or roots you can also use a 6' long bar (like is pictured above) to make the pilot holes.Install the corner Ground Sockets using the installation tool. The top of the Ground Socket should be flush with the ground. Now use the Auger Bit and the same process to Install the side poles evenly spaced at 10' 3" and 20' 6" and 30' 9. Put 10 pcs top rail pipe small side up in the Ground Sockets. Assemble 30" pipes (C) to 5 of the 10' 6" length vertical poles by drilling a small hole, then inserting self drilling screws (E).
Install all of the 3 way & 4 way fittings and the rest of the Top Rail Pipe. HANG YOUR BATTING CAGE NET. Lay out your batting cage inside the frame.
Find the top three ropes and tie them to the end bar, and then do the same to the other end. Attach the Hanger clips to the Frame, then to the thicker rope on the net.
There will be hanger clips on the sides & middle. Now you can tighten up the end ropes depending on how tight you want your net to hang. Tie the bottom rope tails to the bottom part of the end arch legs to prevent the wind from blowing the net inward.
Industry Standard is Batting Cages Nets are hung a little loose so that they will better absorb the impact of the balls. These charges are the buyers responsibility. We do not mark merchandise values below value or mark items as'gifts' US and International government regulations prohibit such behavior.
The item "Batting Cage Frame Kit 10' x 12' x 40' EZ UP & DOWN Baseball Softball Frame Kit" is in sale since Tuesday, December 11, 2018. This item is in the category "Sporting Goods\Team Sports\Baseball & Softball\Training Aids\Batting Cages & Netting". The seller is "jones-sports" and is located in Centralia, Missouri. This item can be shipped to United States.